dot1x reauthentication
Use this command to enable reauthentication on a port.
Use the no parameter to disable reauthentication on a port.
Command Syntax
dot1x reauthentication
no dot1x reauthentication
Parameters
None
Default
The dot1x reauthentication default is disabled.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#interface eth0
(config-if)#dot1x reauthentication
Last modified date: 07/06/2023