OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Layer 2 Subinterface Commands : show cross-connect
show cross-connect
Use this command to display the cross-connected subinterfaces along with their status and total number of cross-connects configured in the system.
Command Syntax
show cross-connect <WORD>
Parameters
WORD
Cross-connect name
Default
None
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show cross-connect
cross-connect status
XC name Ep1 Ep2 Status
-----------------------------+----------------+----------------+-------
c1 xe1.1 xe1.2 UP
-----------------------------+----------------+----------------+-------
AC cross-connect summary
Total : 1
Up : 1
Down : 0
#show cross-connect c1
cross-connect status
XC name Ep1 Ep2 Status
-----------------------------+----------------+----------------+-------
c1 xe1.1 xe1.2 UP
-----------------------------+----------------+----------------+-------
Last modified date: 07/06/2023