OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Layer 2 Subinterface Commands : no subinterfaces
no subinterfaces
Use this command to unconfigure all the subinterfaces of any type (layer 2 or layer 3) created under a parent port.
Command Syntax
no subinterfaces
Parameters
None
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#interface xe1
(config-if)#no subinterfaces
(config-if)#exit
 
 
Last modified date: 07/06/2023