show l2protocol processing interface

OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Layer 2 Control Protocols Tunneling Commands : show l2protocol processing interface

This command allows you to display the processing information on Layer 2 protocol interface.

Command Syntax

show l2protocol processing interface IFNAME

Parameters

IFNAME

Interface name

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command is introduced was before OcNOS version 3.0.

Examples

#show l2protocol processing interface xe1/1

Bridge Interface Name Protocol Processing Status

====== ============== ======== =================

1 xe1/1 stp Tunnel

1 xe1/1 gmrp Peer

1 xe1/1 gvrp Peer

1 xe1/1 mmrp Peer

1 xe1/1 mvrp Peer

1 xe1/1 lacp Peer

1 xe1/1 lldp Peer

1 xe1/1 efm Peer

1 xe1/1 elmi Peer

1 xe1/1 ptp Peer

1 xe1/1 synce Peer

Last modified date: 07/06/2023