interface sa
Use this command to create a dummy static link aggregate interface (by default an L3 LAG interface) and to add an interface to an existing static link aggregation group.
Use the no form of this command to remove a static link aggregate group and also remove the properties of the po from all member ports.
Command Syntax
interface sa<1-16383>
no interface sa<1-16383>
Parameters
<1-16383>
Channel group number.
Default
By default, interface sa is L3 LAG interface
Command Mode
Configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface sa1
(config-if)#switchport
(config-if)#exit
Last modified date: 07/06/2023