lacp system-priority
Use this command to set the LACP system priority. This priority determines the system responsible for resolving conflicts in the choice of aggregation groups.
Note: A lower numerical value has a higher priority.
Use the no parameter with this command to set the system priority to its default value (32768).
Command Syntax
lacp system-priority <1-65535>
no lacp system-priority
Parameters
<1-65535>
System priority.
Default
By default, system priority is 32768
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#lacp system-priority 6700
Last modified date: 07/06/2023