show static-channel-group
Use this command to display the types of load-balancing port selection criteria (PSC) used on configured static aggregators.
Command Syntax
show static-channel-group (<1-16383>|)
Parameters
<1-16383>
Specify channel-group number.
Command Mode
Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following is an example of the output of this command:
#show static-channel-group 1
% Static Aggregator: sa1
% Member:
eth1
Last modified date: 07/06/2023