OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Provider Bridging Commands : switchport customer-edge vlan registration
switchport customer-edge vlan registration
Use this command to configure the VLAN registration parameters.
Use the no parameter with this command to delete the mapping from the interface.
Command Syntax
switchport customer-edge vlan registration WORD
no switchport customer-edge vlan registration
Parameters
WORD
Name of the CVLAN registration table.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth1
(config-if)#switchport customer-edge vlan registration customer1
 
 
 
 
 
Last modified date: 07/06/2023