destination port
Use this command to configure a mirror-to port per local monitor session. A destination port can be a physical port or a trunk port.
Use the no parameter to remove the destination port from a local monitor session.
Command Syntax
destination interface IFNAME
no destination interface IFNAME
Parameters
IFNAME
Interface name
Default
No default value is specified
Command Mode
Monitor configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface xe3
(config-if)#switchport
(config-if)#exit
(config)#monitor session 1
(config-monitor)#destination interface xe3
(config-monitor)#no destination interface xe3
Last modified date: 07/06/2023