link-flap errdisable
Use this command to shut down the interface when it continually goes up and down.
The link-flap ErrDisable feature must be enabled globally with the
errdisable cause command.
Note: When link-flap ErrDisable is enabled globally, then all interfaces are enabled. Link-flap ErrDisable can be enabled globally, but disabled for a specific interface with the no link-flap errdisable command.
Note: This feature is supported only on physical ports.
Use the no form of this command to disable this behavior.
Command Syntax
link-flap errdisable
no link-flap errdisable
Parameter
None
Default
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface xe1/1
(config-if)#link-flap errdisable
Last modified date: 07/06/2023