hardware-profile filter evpn-mpls-cw

OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : EVPN MPLS Commands : hardware-profile filter evpn-mpls-cw

This hardware filter needs to be enabled, to allow configuring EVPN-MPLS with control-word functionality per EVI. Filter cannot be disabled if "EVPN-MPLS" is globally enabled.

Before enabling EVPN MPLS per-evi control-word (evpn mpls id command), give this command.

Before disabling the hardware-profile, disable EVPN MPLS globally (no evpn mpls enable).

Note: You need to save the configuration and do a reboot after giving this command.

Use the disable form of this command to disable the configured hardware-profile.

Command Syntax

hardware-profile filter evpn-mpls-cw enable

hardware-profile filter evpn-mpls-cw disable

Parameters

None

Default

By default, EVPN MPLS control-word hardware-profile is disabled.

Command Mode

Config mode

Applicability

This command was introduced in OcNOS version 6.1.0.

Example

#configure terminal

(config)# hardware-profile filter evpn-mpls-cw enable

(config)# hardware-profile filter evpn-mpls-cw disable

Last modified date: 07/17/2023