learning disable
Use this command to disable learning on a particular Attachment Circuit (AC) interface.
Use the no form of this command to enable learning on a particular AC interface.
Note: This command disables MAC learning only on that interface.
Command Syntax
learning disable
no learning disable
Parameters
None
Command Mode
access-if-vpls mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1.2 switchport
(config-if)#access-if-vpls
(config-acc-if-vpls)#learning disable
(config-acc-if-vpls)#end
Last modified date: 07/17/2023