show mpls cross-connect-table backup
Use this command to display detailed information for all entries created in the MPLS backup cross-connect table.
Command Syntax
show mpls cross-connect-table backup
Parameter
None
Command Mode
Exec mode and Privileged Exec mod
Applicability
This command is newly introduced in OcNOS version 5.1.
Example
The following is a sample output of the show mpls cross-connect-table backup
#show mpls cross-connect-table backup
Backup Cross connect ix: 4, in intf: - in label: 0 out-segment ix: 17
Owner: LDP, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 17, owner: LDP, Stale: NO, out intf: xe3, out label: 24324
Nexthop addr: 20.20.20.2 cross connect ix: 2, op code: Push
Primary xc-ix 2 out-segment ix 17
Backup Cross connect ix: 3, in intf: - in label: 0 out-segment ix: 12
Owner: LDP, Persistent: No, Admin Status: Down, Oper Status: Not present
Out-segment with ix: 12, owner: LDP, Stale: NO, out intf: xe21, out label: 24320
Nexthop addr: 10.10.10.2 cross connect ix: 2, op code: Push
Primary xc-ix 2 out-segment ix 17
Last modified date: 07/17/2023