show mpls ftn-table
Use this command to display FTN (FEC-To-NHLF) table information.
Command Syntax
show mpls ftn-table
Parameters
None
Command Mode
Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
If LFA is not present
#show mpls ftn-table
Primary FTN entry with FEC: 10.10.10.0/24, id: 2, row status: Active, Tunnel-Policy: N/A
Owner: LDP, distance: 0, Action-type: Redirect to LSP, Exp-bits: 0x0, Incoming DSCP: none
Tunnel id: 0, Protected LSP id: 0, Description: N/A, Color: 0
Cross connect ix: 3, in intf: - in label: 0 out-segment ix: 3
Owner: N/A, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 3, owner: N/A, Stale: NO, out intf: xe1, out label: 3
Nexthop addr: 50.50.50.1 cross connect ix: 3, op code: Push
If Backup is present
#show mpls ftn-table
Primary FTN entry with FEC: 10.10.10.0/24, id: 2, row status: Active, Tunnel-Policy: N/A
Owner: LDP, distance: 0, Action-type: Redirect to LSP, Exp-bits: 0x0, Incoming DSCP: none
Tunnel id: 0, Protected LSP id: 0, Description: N/A, Color: 0
Cross connect ix: 3, in intf: - in label: 0 out-segment ix: 3
Owner: N/A, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 3, owner: N/A, Stale: NO, out intf: xe1, out label: 3
Nexthop addr: 50.50.50.1 cross connect ix: 3, op code: Push
Backup Cross connect ix: 4, in intf: - in label: 0 out-segment ix: 8
Owner: N/A, Persistent: No, Admin Status: Up, Oper Status: Up
Out-segment with ix: 8, owner: N/A, Stale: NO, out intf: xe3, out label: 3
Nexthop addr: 20.20.20.1 cross connect ix: 3, op code: Push
Last modified date: 07/17/2023