show ipv6 mld groups
Use this command to display the multicast groups with receivers directly connected to the router, and learned through MLD.
Command Syntax
show ipv6 mld groups (detail|)
show ipv6 mld groups IFNAME (detail|)
show ipv6 mld groups IFNAME X:X::X:X (detail|)
show ipv6 mld groups X:X::X:X (detail|)
show ipv6 mld (vrf NAME|) groups (detail|)
show ipv6 mld (vrf NAME|) groups IFNAME (detail|)
show ipv6 mld (vrf NAME|) groups IFNAME X:X::X:X (detail|)
show ipv6 mld (vrf NAME|) groups X:X::X:X (detail|)
Parameters
vrf
Indicates the vrf keyword.
NAME
Displays the VRF name.
X:X::X:X
Displays the multicast group address.
IFNAME
Interface name for which to display local information.
detail
MLDv2 source information.
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced in OcNOS version 6.2.0.
Example
The following command displays local-membership information for all interfaces:
#show ipv6 mld groupsOcNOS version 6.1.0
MLD Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
ff1e::10 ge10 00:03:16 00:01:09 fe80::202:b3ff:fef0:79d8
Table 6-14: Show ipv6 mld groups
Entry | Description |
|---|
Group Address | As stated. |
Interface | A directly connected interface to the router |
Uptime | Up time for multicast group |
Expires | Time before multicast group needs to send another uptime message to the directly connected router. |
Last Reporter | IPv6 IP address of last reporter node in the group. |
Last modified date: 06/07/2023