ip multicast route-limit
Use this command to limit the number of multicast routes that can be added to a multicast routing table. It generates an error message when the limit is exceeded. If the threshold parameter is set, a threshold warning message is generated when this threshold is exceeded and the message continues to occur until the number of mroutes reaches the limit set by the limit argument.
Note: The mroute warning threshold must not exceed the mroute limit.
Use the no parameter with this command to disable this configuration.
Command Syntax
ip multicast route-limit <1-2147483647>
ip multicast route-limit <1-2147483647> <1-2147483647>
ip multicast (vrf NAME|) route-limit <1-2147483647>
ip multicast (vrf NAME|) route-limit <1-2147483647> <1-2147483647>
no ip multicast route-limit
no ip multicast (vrf NAME|) route-limit
Parameters
vrf
VRF name
<1-2147483647>
Number of routes
<1-2147483647>
Threshold at which to generate a warning message
Default
The default limit and threshold value is 2147483647.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#ip multicast route-limit 34 24
Last modified date: 08/29/2023