ip igmp ssm-map enable
Use this command to enable SSM mapping on the router. This command applies to interfaces configured for IGMP Layer-3 multicast protocols and IGMP Proxy.
Use the no parameter with this command to disable SSM mapping.
Command Syntax
ip igmp ssm-map enable
ip igmp (vrf NAME|) ssm-map enable
no ip igmp ssm-map enable
no ip igmp (vrf NAME|) ssm-map enable
Parameter
vrf
Specify the VRF name.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
This example shows how to configure SSM mapping on the router.
#configure terminal
(config)#ip igmp ssm-map enable
Last modified date: 08/29/2023