IPI-RADIUS
Configure vrf name
VRF Name associated with this instance
This command is supported when following feature are enabled aaa feature
Attribute Name: vrf-name
Attribute Type: string
Attribute Name: key-type
Attribute Type: enum (0|7)
Attribute Name: secret-key-string
Attribute Type: string
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
<key-type>0</key-type> <!-- operation="delete"-->
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
</config>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login key (0|7) WORD (vrf management|)
Configure timeout
VRF Name associated with this instance
This command is supported when following feature are enabled aaa feature
Attribute Name: vrf-name
Attribute Type: string
Attribute Name: timeout
Attribute Type: uint8
Attribute Range: 1-60
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
<timeout>1</timeout> <!-- operation="delete"-->
</config>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login timeout <1-60> (vrf management|)
Configure sequence number
Use this attribute to set the sequence-number/priority index for the RADIUS server
This command is supported when following feature are enabled aaa feature
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
</config>
<sequence-number>1</sequence-number>
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8>
Configure secret key string
Shared key used between the authentication-server and the device
This command is supported when following feature are enabled aaa feature
Attribute Name: secret-key-string
Attribute Type: string
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Attribute Name: key-type
Attribute Type: enum (0|7)
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
<sequence-number>1</sequence-number> <!-- operation="delete"-->
<key-type>0</key-type> <!-- operation="delete"-->
</config>
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD
Configure accounting port
Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages
This command is supported when following feature are enabled aaa feature
Attribute Name: accounting-port
Attribute Type: uint16
Attribute Range: 0-65535
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Attribute Name: key-type
Attribute Type: enum (0|7)
Attribute Name: secret-key-string
Attribute Type: string
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
<sequence-number>1</sequence-number> <!-- operation="delete"-->
<key-type>0</key-type> <!-- operation="delete"-->
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
</config>
<accounting-port>0</accounting-port> <!-- operation="delete"-->
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD acct-port <0-65535>
Configure host address
To represent the timeout configured by the user
This command is supported when following feature are enabled aaa feature
Attribute Name: timeout
Attribute Type: uint8
Default Value: 5
Attribute Range: 1-60
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Attribute Name: key-type
Attribute Type: enum (0|7)
Attribute Name: secret-key-string
Attribute Type: string
Attribute Name: accounting-port
Attribute Type: uint16
Attribute Range: 0-65535
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
<sequence-number>1</sequence-number> <!-- operation="delete"-->
<key-type>0</key-type> <!-- operation="delete"-->
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
<accounting-port>0</accounting-port> <!-- operation="delete"-->
</config>
<timeout>1</timeout> <!-- operation="delete"-->
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD acct-port <0-65535> timeout <1-60>
Configure authentication port
Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS authentication messages
This command is supported when following feature are enabled aaa feature
Attribute Name: authentication-port
Attribute Type: uint16
Attribute Range: 0-65535
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Attribute Name: key-type
Attribute Type: enum (0|7)
Attribute Name: secret-key-string
Attribute Type: string
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
<sequence-number>1</sequence-number> <!-- operation="delete"-->
<key-type>0</key-type> <!-- operation="delete"-->
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
</config>
<authentication-port>0</authentication-port> <!-- operation="delete"-->
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535>
Configure key type
Use this attribute to configure a RADIUS server and specify a UDP port to use for RADIUS accounting messages
This command is supported when following feature are enabled aaa feature
Attribute Name: accounting-port
Attribute Type: uint16
Attribute Range: 0-65535
Attribute Name: sequence-number
Attribute Type: uint8
Attribute Range: 1-8
Attribute Name: key-type
Attribute Type: enum (0|7)
Attribute Name: secret-key-string
Attribute Type: string
Attribute Name: authentication-port
Attribute Type: uint16
Attribute Range: 0-65535
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrfs>
<vrf>
<vrf-name>management</vrf-name>
<config>
<vrf-name>management</vrf-name>
</config>
<remote-servers>
<server>
<host-address>A.B.C.D</host-address>
<config>
<host-address>A.B.C.D</host-address>
<sequence-number>1</sequence-number> <!-- operation="delete"-->
<key-type>0</key-type> <!-- operation="delete"-->
<secret-key-string>WORD</secret-key-string> <!-- operation="delete"-->
<authentication-port>0</authentication-port> <!-- operation="delete"-->
</config>
<accounting-port>0</accounting-port> <!-- operation="delete"-->
</server>
</remote-servers>
</vrf>
</vrfs>
</radius>
Command Syntax
radius-server login host (A.B.C.D|X:X::X:X|HOSTNAME) (vrf management|) seq-num <1-8> key (0|7) WORD auth-port <0-65535> acct-port <0-65535>
Configure enable
This attribute is to enable/disable RADIUS debug logging
Attribute Name: enable
Attribute Type: empty
Netconf edit-config payload
<radius xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<debug>
<config>
</enable><!-- operation="delete"-->
</config>
</debug>
</radius>
Command Syntax
debug radius
clear radius-server counters (vrf management|)
Attribute Name: vrf-name
Attribute Type: string
Netconf RPC payload
<radius-clear-all-server-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<vrf-name>management</vrf-name>
</radius-clear-all-server-counters>
Command Syntax
clear radius-server counters (vrf management|)
clear radius-server host (A.B.C.D|X:X::X:X|HOSTNAME) counters (vrf (management|all)|)
Attribute Name: hostname
Attribute Type: union
Attribute Name: vrf-name
Attribute Type: string
Netconf RPC payload
<radius-clear-server-counters xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius">
<hostname>A.B.C.D</hostname>
<vrf-name>management</vrf-name>
</radius-clear-server-counters>
Command Syntax
clear radius-server host (A.B.C.D|X:X::X:X|HOSTNAME) counters (vrf (management|all)|)
debug radius
Netconf RPC payload
<radius-terminal-debug-on xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius"/>
Command Syntax
debug radius
no debug radius
Netconf RPC payload
<radius-terminal-debug-off xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-radius"/>
Command Syntax
no debug radius