IPI-DHCP-SERVER
Configure enable ipv4 server
Interface on which IPv4 DHCP Server has to be run
Attribute Name: enable-ipv4-server
Attribute Type: empty
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
</enable-ipv4-server><!-- operation="delete"-->
</interface>
</interfaces>
</server>
</dhcp>
Command Syntax
ip dhcp server
Configure enable ipv6 server
Interface on which IPv6 DHCP Server has to be run
Attribute Name: enable-ipv6-server
Attribute Type: empty
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<interfaces>
<interface>
<name>WORD</name>
<config>
<name>WORD</name>
</config>
</enable-ipv6-server><!-- operation="delete"-->
</interface>
</interfaces>
</server>
</dhcp>
Command Syntax
ipv6 dhcp server
Configure pool6 name
IPv6 DHCP Server address pool name
Attribute Name: pool6-name
Attribute Type: string
Attribute Range: 1-63
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool> <!-- operation="delete"-->
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
</config>
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ipv6 dhcp server pool NAME
Configure pool name
IPv4 DHCP Server address pool name
Attribute Name: pool-name
Attribute Type: string
Attribute Range: 1-63
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool> <!-- operation="delete"-->
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ip dhcp server pool NAME
Configure max lease time
Maximum length in seconds that will be assigned to a lease.If not defined, the default maximum lease time is 86400.
Attribute Name: max-lease-time
Attribute Type: uint32
Default Value: 86400
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<max-lease-time>SECONDS</max-lease-time> <!-- operation="delete"-->
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ip dhcp server max-lease-time SECONDS
Configure default lease time
Length in seconds that will be assigned to a lease if the client requesting the lease does not ask for a specific expiration time. The default is 43200
Attribute Name: default-lease-time
Attribute Type: uint32
Default Value: 43200
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<default-lease-time>SECONDS</default-lease-time> <!-- operation="delete"-->
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ip dhcp server default-lease-time SECONDS
Configure rapid commit
Option enables the DHCP Client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).
Attribute Name: rapid-commit
Attribute Type: empty
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
</rapid-commit><!-- operation="delete"-->
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ipv6 dhcp server rapid-commit
Configure preference
Use this to configure preference option in dhcp server.
Attribute Name: preference
Attribute Type: empty
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
</preference><!-- operation="delete"-->
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ipv6 dhcp server preference
Configure vrf name
Option enables the DHCP Client to obtain configuration parameters from the server through a rapid two message exchange (solicit and reply).
Attribute Name: rapid-commit
Attribute Type: empty
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
</rapid-commit><!-- operation="delete"-->
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ipv6 dhcp server rapid-commit
Configure host name
IPv4 DHCP Server option to provide hostname details to a DHCP client
Attribute Name: host-name
Attribute Type: string
Attribute Range: 1-63
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<host-name>NAME</host-name> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
host-name NAME
Configure routers
IPv4 DHCP Server option to provide routers details to a DHCP client
Attribute Name: routers
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<routers>A.B.C.D</routers> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
routers A.B.C.D
Configure ntp server
IPv4 DHCP Server option to provide ntp-server details to a DHCP client
Attribute Name: ntp-server
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<ntp-server>A.B.C.D</ntp-server> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
ntp-server A.B.C.D
Configure boot file
IPv4 DHCP Server option to provide boot-file details to a DHCP client
Attribute Name: boot-file
Attribute Type: string
Attribute Range: 1-63
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<boot-file>BOOTFILE</boot-file> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
boot-file BOOTFILE
Configure tftp server
IPv4 DHCP Server option to provide tftp-server details to a DHCP client
Attribute Name: tftp-server
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<tftp-server>A.B.C.D</tftp-server> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
tftp-server A.B.C.D
Configure log server
IPv4 DHCP Server option to provide log-server details to a DHCP client
Attribute Name: log-server
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<log-server>A.B.C.D</log-server> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
log-server A.B.C.D
Configure dns server
IPv4 DHCP Server option to provide dns name-server details to a DHCP client
Attribute Name: dns-server
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
</config>
<dns-server>A.B.C.D</dns-server> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
dns-server A.B.C.D
Configure netmask
Mask part of the subnet that will be used to assign IPv4 addresses to hosts
Attribute Name: netmask
Attribute Type: inet:ipv4-address
Attribute Name: network
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
<network>A.B.C.D</network> <!-- operation="delete"-->
</config>
<netmask>A.B.C.D</netmask> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
network A.B.C.D netmask A.B.C.D
Configure high address in range
Specifies the high range of the IPv4 addresses that the DHCP server should assign to DHCP clients.
Attribute Name: high-address-in-range
Attribute Type: inet:ipv4-address
Attribute Name: low-address-in-range
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp-pools>
<dhcp-pool>
<pool-name>NAME</pool-name>
<config>
<pool-name>WORD</pool-name>
<low-address-in-range>A.B.C.D</low-address-in-range> <!-- operation="delete"-->
</config>
<high-address-in-range>A.B.C.D</high-address-in-range> <!-- operation="delete"-->
</dhcp-pool>
</dhcp-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
address range low-address A.B.C.D (high-address A.B.C.D|)
Configure domain name
IPv6 DHCP Server option to provide domain-name details to a DHCP client
This command is supported when following feature are enabled IPV6 feature
Attribute Name: domain-name
Attribute Type: string
Attribute Range: 1-63
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
</config>
<domain-name>NAME</domain-name> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
domain-name NAME
Configure vendor options
IPv6 DHCP Server option to provide vendor details to a DHCP client
This command is supported when following feature are enabled IPV6 feature
Attribute Name: vendor-options
Attribute Type: string
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
</config>
<vendor-options>VENDOR-OPTS</vendor-options> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
vendor-options VENDOR-OPTS
Configure ipv6 netmask
Mask part of the subnet that will be used to assign IPv6 addresses to hosts
This command is supported when following feature are enabled IPV6 feature
Attribute Name: ipv6-netmask
Attribute Type: uint8
Attribute Range: 1-128
Attribute Name: ipv6-network
Attribute Type: inet:ipv6-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
<ipv6-network>X:X::X:X</ipv6-network> <!-- operation="delete"-->
</config>
<ipv6-netmask>1</ipv6-netmask> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
network X:X::X:X netmask <1-128>
Configure low address in range
Specifies the high range of the IPv6 addresses that the DHCP server should assign to DHCP clients.
This command is supported when following feature are enabled IPV6 feature
Attribute Name: high-address-in-range
Attribute Type: inet:ipv6-address
Attribute Name: low-address-in-range
Attribute Type: inet:ipv6-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
<low-address-in-range>X:X::X:X</low-address-in-range> <!-- operation="delete"-->
</config>
<high-address-in-range>X:X::X:X</high-address-in-range> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
address range low-address X:X::X:X (high-address X:X::X:X|)
Configure temporary address
Specifies the temporary IPv6 address that the DHCP server should assign to DHCP clients.
This command is supported when following feature are enabled IPV6 feature
Attribute Name: temporary-address
Attribute Type: inet:ipv6-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
</config>
<temporary-address>X:X::X:X</temporary-address> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
temporary address X:X::X:X
Configure ipv6 prefix netmask
Mask part of the ipv6 Prefix used for Prefix delegation
This command is supported when following feature are enabled IPV6 feature
Attribute Name: ipv6-prefix-netmask
Attribute Type: uint8
Attribute Range: 1-128
Attribute Name: ipv6-prefix-high-address
Attribute Type: inet:ipv6-address
Attribute Name: ipv6-prefix-low-address
Attribute Type: inet:ipv6-address
Netconf edit-config payload
<dhcp xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-dhcp">
<server>
<vrfs>
<vrf>
<vrf-name>WORD</vrf-name>
<config>
<vrf-name>WORD</vrf-name>
</config>
<dhcp6-pools>
<dhcp6-pool>
<pool6-name>NAME</pool6-name>
<config>
<pool6-name>WORD</pool6-name>
<ipv6-prefix-high-address>X:X::X:X</ipv6-prefix-high-address> <!-- operation="delete"-->
<ipv6-prefix-low-address>X:X::X:X</ipv6-prefix-low-address> <!-- operation="delete"-->
</config>
<ipv6-prefix-netmask>1</ipv6-prefix-netmask> <!-- operation="delete"-->
</dhcp6-pool>
</dhcp6-pools>
</vrf>
</vrfs>
</server>
</dhcp>
Command Syntax
prefix high-range X:X::X:X low-range X:X::X:X netmask <1-128>