OcNOS-SP : NetConf Command Reference : NetConf Reference : IPI-ACL-ARP
IPI-ACL-ARP
Configure source mac any
Use this attribute to indicate any source address.
Attribute Name: source-mac-any
Attribute Type: empty
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: union
Attribute Name: destination-ip-address
Attribute Type: union
Attribute Name: destination-mac-any
Attribute Type: empty
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
</destination-mac-any><!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
</source-mac-any><!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any|host A.B.C.D|A.B.C.D/M|A.B.C.D A.B.C.D) (any|host A.B.C.D|A.B.C.D/M|A.B.C.D A.B.C.D) mac any any (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure name
Use this attribute to indicate any source address.
Attribute Name: source-mac-any
Attribute Type: empty
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: destination-mac-host
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<destination-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-host> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
</source-mac-any><!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac any host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure type
Use this attribute to indicate any source address.
Attribute Name: source-mac-any
Attribute Type: empty
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: destination-mac-address
Attribute Type: string
Attribute Name: destination-mac-mask
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<destination-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-address> <!-- operation="delete"-->
<destination-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-mask> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
</source-mac-any><!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac any (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure source mac host
Use this attribute to set Host source address.
Attribute Name: source-mac-host
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: destination-mac-any
Attribute Type: empty
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
</destination-mac-any><!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-host> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) any (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure sequence id
Use this attribute to set Host source address.
Attribute Name: source-mac-host
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: destination-mac-host
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<destination-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-host> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-host> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure forwarding action
Use this attribute to set Host source address.
Attribute Name: source-mac-host
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: destination-mac-address
Attribute Type: string
Attribute Name: destination-mac-mask
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<destination-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-address> <!-- operation="delete"-->
<destination-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-mask> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-host> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure source mac address
Use this attribute to set source mac-address.
Attribute Name: source-mac-address
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: source-mac-mask
Attribute Type: string
Attribute Name: destination-mac-any
Attribute Type: empty
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<source-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-mask> <!-- operation="delete"-->
</destination-mac-any><!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-address> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) any (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure arp packet type
Use this attribute to set source mac-address.
Attribute Name: source-mac-address
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: source-mac-mask
Attribute Type: string
Attribute Name: destination-mac-host
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<source-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-mask> <!-- operation="delete"-->
<destination-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-host> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-address> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure source ip address
Use this attribute to set source mac-address.
Attribute Name: source-mac-address
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: destination-ip-address
Attribute Type: enum (any)
Attribute Name: source-mac-mask
Attribute Type: string
Attribute Name: destination-mac-address
Attribute Type: string
Attribute Name: destination-mac-mask
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<destination-ip-address>any</destination-ip-address> <!-- operation="delete"-->
<source-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-mask> <!-- operation="delete"-->
<destination-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-address> <!-- operation="delete"-->
<destination-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</destination-mac-mask> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-address> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) response ip (any) (any) mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure vlan id
Use this attribute to indicate any source address.
Attribute Name: source-mac-any
Attribute Type: empty
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
</source-mac-any><!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) ((request)|) ip (any) mac any (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure inner vlan id
Use this attribute to set Host source address.
Attribute Name: source-mac-host
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-host>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-host> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) ((request)|) ip (any) mac host (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Configure source mac mask
Use this attribute to set source mac-address.
Attribute Name: source-mac-address
Attribute Type: string
Attribute Name: forwarding-action
Attribute Type: enum (deny|permit)
Attribute Name: arp-packet-type
Attribute Type: enum (none|request|response)
Attribute Name: source-ip-address
Attribute Type: enum (any)
Attribute Name: source-mac-mask
Attribute Type: string
Attribute Name: vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Attribute Name: inner-vlan-id
Attribute Type: uint16
Attribute Range: 1-4094
Netconf edit-config payload
<acl xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-acl">
<acl-sets>
<acl-set>
<name>NAME</name>
<config>
<name>WORD</name>
<type>mac</type>
</config>
<type>mac</type>
<acl-entries>
<acl-entry>
<sequence-id>1</sequence-id>
<config>
<sequence-id>1</sequence-id>
</config>
<arp>
<config>
<forwarding-action>deny</forwarding-action> <!-- operation="delete"-->
<arp-packet-type>none</arp-packet-type> <!-- operation="delete"-->
<source-ip-address>any</source-ip-address> <!-- operation="delete"-->
<source-mac-mask>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-mask> <!-- operation="delete"-->
<vlan-id>1</vlan-id> <!-- operation="delete"-->
<inner-vlan-id>1</inner-vlan-id> <!-- operation="delete"-->
<source-mac-address>XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX</source-mac-address> <!-- operation="delete"-->
</config>
</arp>
</acl-entry>
</acl-entries>
</acl-set>
</acl-sets>
</acl>
Command Syntax
(<1-268435453>|) (deny|permit) ((request)|) ip (any) mac (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (XX-XX-XX-XX-XX-XX|XX:XX:XX:XX:XX:XX|XXXX.XXXX.XXXX) (vlan <1-4094>|) (inner-vlan <1-4094>|)
Last modified date: 08/22/2023