IPI-NETWORK-ADDRESS-TRANSLATION
Configure generic timeout
Generic time-out for NAT translations
This command is supported when following feature are enabled NAT feature
Attribute Name: generic-timeout
Attribute Type: uint32
Default Value: 0
Attribute Range: 0-536870
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<timeouts>
<config>
<generic-timeout>0</generic-timeout> <!-- operation="delete"-->
</config>
</timeouts>
</network-address-translation>
Command Syntax
ip nat translations time-out <0-536870>
Configure icmp timeout
ICMP timeout for NAT translations
This command is supported when following feature are enabled NAT feature
Attribute Name: icmp-timeout
Attribute Type: uint32
Default Value: 0
Attribute Range: 0-536870
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<timeouts>
<config>
<icmp-timeout>0</icmp-timeout> <!-- operation="delete"-->
</config>
</timeouts>
</network-address-translation>
Command Syntax
ip nat translations icmp-timeout <0-536870>
Configure tcp timeout
TCP timeout for NAT translation
This command is supported when following feature are enabled NAT feature
Attribute Name: tcp-timeout
Attribute Type: uint32
Default Value: 0
Attribute Range: 0-536870
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<timeouts>
<config>
<tcp-timeout>0</tcp-timeout> <!-- operation="delete"-->
</config>
</timeouts>
</network-address-translation>
Command Syntax
ip nat translations tcp-timeout <0-536870>
Configure udp timeout
UDP timeout for NAT translations
This command is supported when following feature are enabled NAT feature
Attribute Name: udp-timeout
Attribute Type: uint32
Default Value: 0
Attribute Range: 0-536870
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<timeouts>
<config>
<udp-timeout>0</udp-timeout> <!-- operation="delete"-->
</config>
</timeouts>
</network-address-translation>
Command Syntax
ip nat translations udp-timeout <0-536870>
Configure tcp fin timeout
TCP FIN timeout for NAT translations
This command is supported when following feature are enabled NAT feature
Attribute Name: tcp-fin-timeout
Attribute Type: uint32
Default Value: 0
Attribute Range: 0-536870
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<timeouts>
<config>
<tcp-fin-timeout>0</tcp-fin-timeout> <!-- operation="delete"-->
</config>
</timeouts>
</network-address-translation>
Command Syntax
ip nat translations tcp-fin-timeout <0-536870>
Configure global address
Network Address Translation Address global address
This command is supported when following feature are enabled NAT feature
Attribute Name: global-address
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<ip-rules>
<incoming>
<source-mapping-entries>
<source-mapping-entry> <!-- operation="delete"-->
<global-address>A.B.C.D</global-address>
<config>
<global-address>A.B.C.D</global-address>
<local-address>A.B.C.D</local-address>
</config>
<local-address>A.B.C.D</local-address>
</source-mapping-entry>
</source-mapping-entries>
</incoming>
</ip-rules>
</network-address-translation>
Command Syntax
ip nat inside source static A.B.C.D A.B.C.D
Configure local address
Network Address Translation Address global address
This command is supported when following feature are enabled NAT feature
Attribute Name: global-address
Attribute Type: inet:ipv4-address
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<ip-rules>
<incoming>
<destination-mapping-entries>
<destination-mapping-entry> <!-- operation="delete"-->
<global-address>A.B.C.D</global-address>
<config>
<global-address>A.B.C.D</global-address>
<local-address>A.B.C.D</local-address>
</config>
<local-address>A.B.C.D</local-address>
</destination-mapping-entry>
</destination-mapping-entries>
</incoming>
</ip-rules>
</network-address-translation>
Command Syntax
ip nat inside destination static A.B.C.D A.B.C.D
Configure address
Network Address Translation global address
This command is supported when following feature are enabled NAT feature
Attribute Name: address
Attribute Type: inet:ipv4-address
Attribute Name: global-port
Attribute Type: uint16
Attribute Range: 0-65535
Netconf edit-config payload
<network-address-translation xmlns="http://www.ipinfusion.com/yang/ocnos/ipi-network-address-translation">
<ip-rules>
<outgoing>
<protocol-rule-mapping-entries>
<protocol-rule-mapping-entry>
<config>
<local-address>A.B.C.D</local-address>
</config>
<local-address>A.B.C.D</local-address>
<global-addresses>
<global-address> <!-- operation="delete"-->
<address>A.B.C.D</address>
<config>
<address>A.B.C.D</address>
<global-port>0</global-port>
</config>
</global-address>
</global-addresses>
</protocol-rule-mapping-entry>
</protocol-rule-mapping-entries>
</outgoing>
</ip-rules>
</network-address-translation>
Command Syntax
ip nat outside destination static (tcp|udp) A.B.C.D <0-65535> A.B.C.D <0-65535>