show pcep segment-routing lsp
Use this command to display information about PCEP segment routing tunnels.
Command Syntax
show pcep segment-routing lsp brief
show pcep segment-routing lsp <1-1048575> pce <1-255>
Parameters
<1-1048575>
LSP identifier
<1-255>
Path computation element entity identifier
brief
Brief information
Command Mode
Exec mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
#show pcep segment-routing lsp 1 pce 1
==============================================================
Tunnel ID : 1
PCEP Entity : 1
Request ID : 0
SRP ID : 0
Tunnel Name : p1
Symbolic Pathname : SR_LSP_1
Admin Status : UP
PCEP Peer : 20.0.0.3
PLSP-ID : 1
CP-ID : 12
Source Address : 1.1.1.1
Destination Address : 2.2.2.2
Extended Tunnel ID : 0.0.0.0
Tunnel Type : NSM SR Policy
PCEP Tunnel Delegate State : Delegation Enabled
PCEP Tunnel Report State : Report Enabled
PCE Initiated : No
Tunnel FSM Recent Event : New Session UP
Request Flag : None Set
Error Flag : None Set
Number of LSPs : 1
LSP ID : 0
Binding value info :
Binding value : 25600
Owner : PCC (local policy)
Alloc Mode : DYNAMIC
Oper Status : UP
SR ERO Hop Count : 1
SR ERO Hops :
Segment Type : 1
SID Label : 16002
SR RRO Hop Count : 1
SR RRO Hops :
Segment Type : 1
SID Label : 16002
Pending Updates : No pending updates
Last modified date: 06/27/2023