1pps-out offset
Use this command to set 1PPS external interface output signal offset in nano seconds.
Use the no form of this command to set default value 0.
Command Syntax
1pps-out offset <-2048-2048>
no 1pps-out offset
Parameters
<-2048-2048>
Offset value in range. Default is 0
Command Mode
PTP Clock Mode
Default
Default offset value is Zero.
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#1pps-out offset 2048
Last modified date: 06/30/2023