announce-receipt-timeout
Use this command to set announce-receipt-timeout. Applicable for only G.8275.2 profile and default profile and G 8265.1.
Use the no form of this command to set default value 3.
Command Syntax
announce-receipt-timeout <2-10>
no announce-receipt-timeout
Parameters
<2-10>
announceReceiptTimeout range (default is 3)
Command Mode
PTP Clock Port Mode
Default
Default offset value is Zero.
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-port 1
(config-clk-port)#announce-receipt-timeout 3
Last modified date: 06/30/2023