OcNOS-SP : Timing and Synchronization Guide : Precision Time Protocol Command Reference : PTP Commands : clock-port
clock-port
Use this command to enter PTP Clock Mode.
Use the no form of the command to remove the clock-port configuration.
Command Syntax
clock-port <1-31>
no clock-port <1-31>
Parameters
<1-32>
Port number
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-port 1
(config-clk-port)#
Last modified date: 06/30/2023