domain
Use this command to set the current synchronization domain:
• For G.8275.1, domain numbers are in the range of 24 - 43 and the default is 24.
• For G.8275.2, domain numbers are in the range of 44 - 63 and the default is 44.
• For the default profile, domain numbers are in the range of 0-127.
• For G 8265.1, domain numbers are in the range of 4-23.
Command Syntax
domain <0-127>
no domain
Parameters
<0-127>
Synchronization domain.
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#domain 30
Last modified date: 06/30/2023