gps-offset
Use this command to set GPS offset in nanoseconds ans seconds.
Use the no form of this command to set default value 0 nanoseconds.
Command Syntax
gps-offset (sec <-100-100> | nsec <-2048-2048>)
no gps-offset
Parameters
sec <-100-100>
Offset value in seconds.
nsec<-2048-2048>
Offset value in nanoseconds.
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#gps-offset sec 100 nsec 2048
Last modified date: 06/30/2023