grandmaster-priority2
Use this command to set grandmaster-priority2 for virtual-clock-port. Applicable for g.8275.1 profile. Not applicable to Ethernet interfaces.
Use the no form of this command to set priority2 default value 128.
Command Syntax
grandmaster-priority2 <0-255>
no grandmaster-priority2
Parameters
<0-255>
Priority range
Command Mode
PTP Clock Port Mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-port 1
(config-clk-port)#grandmaster-priority2 2
Last modified date: 06/30/2023