OcNOS-SP : Timing and Synchronization Guide : Precision Time Protocol Command Reference : PTP Commands : holdover
holdover
Use this command to enable holdover.
Use the no form of this command to set default duration 120.
Command Syntax
holdover <0-10080>
no holdover
Parameters
<0-10080>
Range of holdover in minutes.
Command Mode
PTP Clock Mode
Default
Default holdover minutes is 120.
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#holdover 15
 
 
Last modified date: 06/30/2023