OcNOS-SP : Timing and Synchronization Guide : Precision Time Protocol Command Reference : PTP Commands : master-only
master-only
Use this command to set a port to a master-only port.
Use the no form of this command to delete this configuration.
Command Syntax
master-only
no master-only
Parameters
None
Command Mode
PTP Clock Port Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#clock-port 10
(config-clk-port)#master-only
Last modified date: 06/30/2023