offset-log-variance
Use the command to specify an offset variance. The offset (scaled logarithmic variance) provides an estimate of the variations of the clock from a linear time scale when it is not synchronized to another clock using the PTP protocol.
Use the no form of this command in PTP Clock Mode to set the default value 65535.
Use the no form of this command in PTP Clock Port Mode to set the default value 0x4E5D for clock-port.
Note: Applicable for Non-Ethernet ports for PTP Clock Port mode.
Command Syntax
offset-log-variance <0-65535>
no offset-log-variance
Parameters
<0-65535>
The offset variance when not synchronized.
Command Mode
PTP Clock Mode
PTP Clock Port Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#offset-log-variance 3000
(config-ptp-clk)#clock-port 1
(config-clk-port)#offset-log-variance 2000
Last modified date: 06/30/2023