priority2
Use this command to set the Priority2 attribute of the local clock (as specified in the IEEE-1588 standard).
Use the no form of this command to set default value 128.
Command Syntax
priority2 <1-255>
no priority2
Parameters
<1-255>
The Priority2 attribute.
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#priority2 3
Last modified date: 06/30/2023