ptp clock profile
Use this command to enter PTP Clock Mode and to configure the G 8275.1, G 8275.2, default profile, and G 8265.1.
Use the no form of this command to delete PTP clock.
Note: For a single clock configuration, only clock 0 should be configured. Clock 1 is used only for the IWF use case.
Command Syntax
ptp clock <0-1> profile (g8275.1|g8275.2|default|g8265.1)
no ptp clock <0-1> profile
Parameters
<0-1>
Clock 0 or 1
g8275.1
PTP time/phase g8275.1 telecom profile
g8275.2
PTP time/phase g8275.2 telecom profile
default
PTP time/phase default profile
g8265.1
PTP frequency telecom profile
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)exit
(config)#ptp clock 0 profile g8275.2
(config-ptp-clk)exit
(config)#ptp clock 0 profile default
(config-ptp-clk)exit
(config)#ptp clock 0 profile g8265.1
(config-ptp-clk)exit
Last modified date: 06/30/2023