OcNOS-SP : Timing and Synchronization Guide : Precision Time Protocol Command Reference : PTP Commands : reserved-vlan-base-id
reserved-vlan-base-id
Use this command to set the Reserved VLAN base ID.
Use the no form of this command to set default base id 4064.
Command Syntax
reserved-vlan-base-id <2-4094>
no reserved-vlan-base-id
Parameters
<2-4094>
Base VLAN identifier range.
Command Mode
PTP Clock Mode
Default
Default VLAN base ID is 4064.
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#reserved-vlan-base-id 2
 
Last modified date: 06/30/2023