servo fts
Use this command to enable full time support with synce.
Use the no form of this command to disable servo FTS.
Note: This command is available for default and G.8275.2 profiles only.
Command Syntax
servo fts
no servo
Parameters
None
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 6.0.0.
Example
(config)#ptp clock 0 profile g8275.2
(config-ptp-clk)#servo fts
(config)#ptp clock 0 profile default
(config-ptp-clk)#servo fts
Last modified date: 06/30/2023