show ptp clock port dataset
Use this command to display a summary of PTP ports.
Command Syntax
show ptp clock <0-1> port (<1-31>|) dataset
Parameters
<0-1>
Clock 0 or 1
<1-31>
PTP port number
Command Mode
Privileged Exec mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#show ptp clock 0 port dataset
Port 1:
Port State : Master
Port Identity : B8:6A:97:FF:FE:F5:F4:C4:00:01
Log Min Delay Req Interval : -4
Peer Mean Path Delay : 0
Log Announce Interval : -3
Announce Receipt Timeout : 3
Log Sync Interval : -4
Delay Mechanism : End to end
Version Number : 2
Local Priority : 128
Master only : False
Signal Fail : False
Network Interface : xe0
Vlan Configured :
Description : l3
TTL : 64
DSCP : 56
Unicast Grant Duration : 300
Configured delay asymmetry : 101000000 nsec
Received Packets : 0
Discarded Packets : 0
Transmitted Packets : 99
Last modified date: 06/30/2023