OcNOS-SP : Timing and Synchronization Guide : Precision Time Protocol Command Reference : PTP Commands : slave-only
slave-only
Use this command to set a clock to a slave-only clock.
Use the no form of this command to unconfigure this option.
Command Syntax
slave-only
no slave-only
Parameters
None
Command Mode
PTP Clock Mode
Applicability
This command was introduced in OcNOS version 3.0.
Example
#configure terminal
(config)#ptp clock 0 profile g8275.1
(config-ptp-clk)#slave-only
 
Last modified date: 06/30/2023