transport
Use this command to set transport type as ipv4 or ipv6. Applicable for G.8275.2 profile, G 8265.1, and default profile.
Use the no form of this command to unconfigure transport-type.
Command Syntax
transport (ipv4|ipv6)
no transport
Parameters
ipv4
IPv4 Transport Type
ipv6
IPv6 Transport Type
Command Mode
PTP Clock Port mode
Applicability
This command was introduced in OcNOS version 4.0.
Example
(config)#ptp clock 0 profile g8275.2
(config-ptp-clk)#clock-port 1
(config-clk-port)#transport ipv6
(config)#ptp clock 0 profile default
(config-ptp-clk)#clock-port 1
(config-clk-port)#transport ipv6
(config)#ptp clock 0 profile g8265.1
(config-ptp-clk)#clock-port 1
(config-clk-port)#transport ipv6
Last modified date: 06/30/2023