default-information originate
Use this command to add default routes to the RIP updates.
Use the no parameter with this command to disable this feature.
Command Syntax
default-information originate (always|) (route-map WORD|)
no default-information originate
Parameters
always
Always advertise default route
route map
Route map reference
WORD
Pointer to route-map entries
Default
Disabled
Command Mode*
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router rip
(config-router)#default-information originate route-map pmap
Last modified date: 08/28/2023