send-lifetime
Use this command to specify the time period during which the authentication key on a key chain can be sent.
Use the no parameter with this command to negate this command.
Command Syntax
send-lifetime HH:MM:SS MONTH <01-31> <1993-2035> HH:MM:SS MONTH <01-31> <1993-2035>
send-lifetime HH:MM:SS MONTH <01-31> <1993-2035> infinite
send-lifetime HH:MM:SS MONTH <01-31> <1993-2035> duration <1-2147483646>
no send-lifetime
Parameters
HH:MM:SS
Specify the start time of send-lifetime in hours, minutes and seconds.
<01-31>
Specify the day of the month to start. If the day is a single-digit, the leading 0 must be added, example: 01, 02, 03, etc.
MONTH
Specify the month of the year to start as the first three letters of the month with first letter in upper case, for example, Jan. (case sensitive)
<1993-2035>
Specify the year to start.
HH:MM:SS
Specify the time when send-lifetime expires in hours, minutes and seconds.
<01-31>
Specify the day of the month to end. If the day is a single-digit, the leading 0 must be added, example: 01, 02, 03, etc.
MONTH
Specify the month of the year to end as the first three letters of the month with first letter in caps, for example, Jan. (case sensitive)
<1993-2035>
Specify the year to expire.
duration
Specify the duration of the key in seconds <1-2147483646>.
infinite
Specify the end time to never expire.
Default
Disabled
Command Mode
Keychain-key mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
The following example shows the setting of send-lifetime for key-id 1 on the key chain named mychain:
#configure terminal
(config)#key chain mychain
(config-keychain)#key-id 1
(config-keychain-key)#send-lifetime 03:03:01 Jan 03 2004 04:04:02 Dec 06 2006
Last modified date: 08/28/2023