OcNOS-SP : Segment Routing Guide : Segment Routing Command Reference : Segment Routing v6 Commands : segment-routing srv6 (OSPFv3)
segment-routing srv6 (OSPFv3)
Use this command to enter into segment routing SRv6 mode
Use the no form this to command to disable SRv6 for OSPFv3
Command Syntax
segment-routing srv6
no segment-routing srv6
Parameters
NA
Default
NA
Command Mode
Router IPv6 OSPF mode
Applicability
This command was introduced in OcNOS version 5.1
Example
R1#configure t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router ipv6 ospf 1
R1(config-router)#segment-routing srv6
R1(config-router-srv6)# exit-srv6
 
R1(config)#router ipv6 ospf 1
R1(config-router)#no segment-routing srv6
R1(config-router-srv6)# exit-srv6
 
Last modified date: 06/07/2023