1000Base-T mode
Use this command to set the 1000Base-T mode as master or slave. Applicable for broncos phy ports.
Use no form of this command to unset this configuration and set default value as auto
Command Syntax
1000Base-T (master|slave)
no 1000Base-T
Parameters
Master
Configure 1000Base-T mode to master
slave
Configure 1000Base-T mode to slave
Default
The default value is auto.
Command Mode
Interface Synchronous Ethernet mode
Applicability
This command was introduced in OcNOS version 4.1.
Example
(config)#interface ge1
(config-if)#
(config-if)#synce
(config-if-synce)#1000Base-T master
Last modified date: 06/30/2023