clock-selection mode
Use this command to set whether to use the Quality Level (QL) as a criteria when selecting a clock.
Use the no form of this command to set the QL to its default (ql-enabled).
Command Syntax
clock-selection mode (ql-enabled|ql-disabled)
no clock-selection
Parameters
ql-enabled
Use the quality level as a criteria when selecting a clock
ql-disabled
Do not use the quality level as a criteria when selecting a clock
Default
The default value is ql-enabled.
Command Mode
Synchronous Ethernet mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#synce
(config-synce)#clock-selection mode ql-enabled
(config-synce)#no clock-selection
Last modified date: 06/30/2023