OcNOS-SP : Timing and Synchronization Guide : Synchronous Ethernet Command Reference : SyncE Commands : dpll3-select
dpll3-select
Use this command to select dpll3 as fixed input 10MHZ-IN.
Use no form of this command to unset this configuration.
Command syntax
dpll3-select 10mhz-in
no dpll3-select
Command Mode
Configure Synchronous Ethernet mode
Applicability
This command was introduced before OcNOS version 4.0. Applicable only for UFI-S9500-30XS board.
Examples
(config)#synce
(config-synce)#dpll3-select 10mhz-in
Last modified date: 06/30/2023