holdover
Use this command to set Synchronous holdover.
Use no form of this command to disable holdover.
Command Syntax
holdover (<0-1440>|)
no holdover
Parameters
<0-1440>
Synchronous holdover range in minutes.
Command Mode
Synchronous Ethernet Mode
Default
Default Synchronous holdover is 10 minutes.
Applicability
This command was introduced in OcNOS version 4.0. Applicable only for 10MHz out interface.
Example
#configure terminal
(config)#synce
(config-synce)#holdover 2
Last modified date: 06/30/2023