OcNOS-SP : Timing and Synchronization Guide : Synchronous Ethernet Command Reference : SyncE Commands : output-source
output-source
Use this command to use an Ethernet interface as a timing output source.
Use the no form of this command to stop using an Ethernet interface as a timing output source.
Command Syntax
output-source
no output-source
Parameters
None
Command Mode
Interface Synchronous Ethernet mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
(config)#interface eth1
(config-if)#synce
(config-if-synce)#output-source
 
Last modified date: 06/30/2023