synce (interface mode)

OcNOS-SP : Timing and Synchronization Guide : Synchronous Ethernet Command Reference : SyncE Commands : synce (interface mode)

Use this command to enable Synchronous Ethernet for an interface.

This command changes the mode from interface mode to interface Synchronous Ethernet mode.

This command does not automatically start synchronization distribution. You must explicitly give the mode command, specifying the synchronous option.

Use the no form of this command disable Synchronous Ethernet for an interface.

Command Syntax

synce

no synce

Parameters

None

Command Mode

Interface mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

(config)#interface eth1

(config-if)#synce

(config-if-synce)#

Last modified date: 06/30/2023