ipv6 access-list remark
Use this command to add a description to an IPv6 access control list (ACL).
Use the no form of this command to remove an access control list description.
Command Syntax
remark LINE
no remark
Parameters
LINE
ACL description up to 100 characters.
Default
No default value is specified
Command Mode
IPv6 access-list mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#ipv6 access-list mylist
(config-ipv6-acl)# remark Permit the inside admin address
Last modified date: 08/28/2023