cmlsh transaction
Use this command to enable or disable the transaction-based command-line interface.
Note: IP Infusion Inc. recommends that you do not disable transactions.
Command Syntax
cmlsh transaction (enable | disable)
Parameters
enable
Enable transaction-based command-line interface
disable
Disable transaction-based command-line interface
Default
The transaction-based command-line interface is enabled by default.
Mode
Exec mode
Applicability
This command was introduced in OcNOS version 5.0.
Example
>en
#cmlsh transaction disable
% Deprecated CLI. Disabling transaction mode is not recommended
#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
(config)#router ipv6 ospf test
(config-router)#exit
(config)#show running-config router ipv6 ospf
!
router ipv6 ospf test
!
(config)#
Last modified date: 08/28/2023