ddm monitor
Use this command to enable or disable DDM monitoring for interfaces which have a supported transceiver.
Use the no form of this command to remove DDM monitoring for all transceivers.
Command Syntax
ddm monitor (disable|enable)
no ddm monitor
Parameters
enable
Enable DDM monitoring.
disable
Disable DDM monitoring.
Default
By default, DDM monitoring is disabled.
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface xe1
(config-if)#ddm monitor enable
(config-if)#ddm monitor disable
(config-if)#exit
(config)#interface xe1
(config-if)#no ddm monitor
(config-if)#exit
Last modified date: 08/28/2023